©
National Instruments Corporation
5
SCXI-1314T TEDS Bridge Sensor Terminal Block
4.
Use long-nose pliers to insert the new resistors into the sockets,
indicated in Figure 2.
Figure 2.
SCXI-1314T Shunt Resistor Sockets
5.
Reinstall the top cover and tighten the top cover screws.
6.
Refer to the
SCXI Quick Start Guide
to finish installing the
SCXI-1314T and configure it in Measurement & Automation Explorer
(MAX), and to find instructions for taking measurements.
1
Shunt Resistor Sockets
1