©
National Instruments Corporation
21
SCC-68 User Guide
Installing the SCC Modules in the SCC-68
To install the SCC modules on the SCC slots of the SCC-68, plug the SCC
modules onto the appropriate connector block sockets. When properly
oriented, SCC modules plug easily onto the connector block socket. Never
force an SCC module onto the socket.
SCC Connector Pinouts
This section contains descriptions of all the signals carried by the 20-pin
sockets on the SCC-68 carrier. You can also access these signals by using
an SCC feedthrough module, such as the SCC-FT01. For more information
about the SCC-68 carrier connector locations, refer to the
SCC Quick Start
Guide
at
ni.com/manuals
. Refer to Figure 15 for the pin assignments of
the SCC sockets.
