Chapter 9
SC-2057
©
National Instruments Corporation
9-13
Cabling
You need an SH96-96 shielded cable to connect to the SC-2057.
Connections to the signal conditioning accessories require an NB1 50-pin
ribbon cable. In addition to an NB1 cable, you will need an SCXI-1348
cable adapter to connect to SCXI modules. Additional adapters and cables
may be required for certain accessories.
SCXI-1348 Cable Adapter Installation
This section gives instructions for installing the SCXI-1348 cable adapter.
Figure 9-12 shows how to connect the SCXI-1348 to the SC-2057 and
SCXI module.
Figure 9-12.
Connecting the SCXI-1348 to the SC-2057 and SCXI Module
1
SCXI-1348 cable adapter
2
NB1 ribbon cable
3
SC-2057
4
SCXI chassis
J2
J1
J1
J2
1
2
3
4