Chapter 6
SC-2054
©
National Instruments Corporation
6-9
Figure 6-7.
Pin Assignments for SC-2054 I/O Connectors J6 and J10
Mounting
The SC-2054 adapter has metal standoffs so it can sit on a workbench close
to the host computer. A rack-mount is also available and can be fitted with
a flat acrylic plastic cover or metal wraparound cover. To ground the
SC-2054 adapter to the rack, set the jumper on the adapter as described in
Chapter 10,
.
Cabling
You need an NB5 or R1005050 ribbon cable to connect the SC-2054 to a
96-channel DAQ device, depending on the device. Connections to the
SC-206
X
Series boards require a 26-pin ribbon cable. A 26-conductor
ribbon cable is needed for the 8-channel SSR backplane. Additional cables
are available from National Instruments for connection to other
accessories.
+5 V
PA0
PA1
PA2
PA3
PA4
PA5
PA6
PA7
+5 V
+5 V
+5 V
+5 V
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
25 26
23 24
21 22
19 20
17 18
15 16
13 14
11 12
9
10
7
8
5
6
3
4
1
2
