Caution
To avoid causing damage to the sbRIO-9698 and the C Series
modules, do not allow C Series module support brackets to contact components
on the secondary side of the board-only C Series modules.
Figure 6. Connecting Board-only C Series Modules to the sbRIO-9698
3.
Screw two of the remaining M3 × 4 mm black, low-profile screws into the holes.
Figure 7. Inserting Two Screws into the Module and Bracket Holes
4.
Insert the four M3 × 7 mm standoffs from the secondary side of the NI sbRIO device into
the four mounting standoffs for your application. The mounting standoffs are not included
in the sbRIO-9698 kit.
6
|
ni.com
|
sbRIO-9698 User Manual and Specifications
