NI RMC-8354 Installation Guide
16
ni.com
Note
The hard drive recovery hot key is <F4>. To access the hard drive-based recovery
tool, press and hold <F4> when video first appears during the boot process.
•
The NI RMC-8354 also ships with an OS recovery CD/DVD you can
use to reinstall your operating system onto your hard drive.
If you need to reinstall your operating system, you can use the included
OS recovery CD/DVD. Boot the NI RMC-8354 using the OS recovery
CD/DVD to recover the OS.
Note
You also may need to update or reinstall software after using the OS reinstallation
CD/DVD to recover your OS. The OS reinstallation CD/DVD may contain drivers that are
older or newer than the factory-installed version of the OS and may not contain the latest
RAID drivers. To ensure you have the latest drivers, go to
www.intel.com
and install the
Intel Rapid Storage Technology (Intel RST) RAID software package.
Note
After you reinstall or recover your OS, you may find shortcuts on the desktop that
require you to install specific drivers or software (for example, video drivers). Due to driver
and software packaging, it was not possible to preinstall this software during the OS
installation.
Cleaning
Caution
Always
disconnect the AC power cable before cleaning or servicing the chassis.
Exterior Cleaning
Cautions
Avoid getting moisture inside the chassis during exterior cleaning, especially
through the top vents.
Do
not
wash the front- or rear-panel connectors or switches. Cover these components while
cleaning the chassis.
Do
not
use harsh chemical cleaning agents; they may damage the chassis. Avoid chemicals
that contain benzene, toluene, xylene, acetone, or similar solvents.
Clean the exterior surfaces of the chassis with a dry lint-free cloth or a
soft-bristle brush. Do
not
use abrasive compounds on any part of the
chassis.
