National Instruments PXIe-7858, Начало работы

Страница: 5 / 10

Store the device in the antistatic package when the device is not in use.
Verifying the Kit Contents
Verify that the following items are included in the NI PXIe-7858R kit.
Figure 1. NI PXIe-7858R Kit Contents
3 2 1
1. Hardware
2. NI-RIO Media
3. Getting Started Guide
Installing Software on the Host Computer
Before using the NI PXIe-7858R, you must install the following application software
and device drivers on the host computer.
1. LabVIEW 2016 or later
2. LabVIEW Real-Time Module 2016 or later
[1]
3. LabVIEW FPGA Module 2016 or later
4. NI R Series Multifunction RIO Device Drivers August 2016 or later
Visit ni.com/info and enter the Info Code softwareversion for minimum software
support information.
1
LabVIEW Real Time Module is only required when the R Series board is used in a
chassis where the PXIe Controller is running a real-time operating system.
© National Instruments
5
PXIe-7858 Getting Started