National Instruments PXIe-5785, Руководство по началу работы

Страница: 12 / 14

Making a Measurement
Making a Measurement with LabVIEW
1. Launch LabVIEW.
2. Select Help » Find Example .
3. Open the example VI that you want to use by selecting Hardware Input and Output »
FlexRIO .
4. Follow any setup, configuration, and execution instructions in the VI.
Troubleshooting
If an issue persists after you complete a troubleshooting procedure, contact NI technical
support or visit
ni.com/support .
What Should I Do if the PXIe-5785 Doesn't Appear in
MAX?
1. In the MAX configuration tree, expand Devices and Interfaces .
2. Expand the Chassis tree to see the list of installed hardware, and press <F5> to refresh
the list.
3. If the module is still not listed, power off the system, ensure that all hardware is correctly
installed, and restart the system.
4. Navigate to the Device Manager.
Operating System Description
Windows 10/8.1 Right-click the Start button, and select Device Manager .
Windows 7 Select Start » Control Panel » Device Manager .
5. Verify the PXIe-5785 appears in the Device Manager.
a)
Under an NI entry, confirm that a PXIe-5785 entry appears.
Note If you are using a PC with a device for PXI remote control system,
under System Devices , also confirm that no error conditions appear for the
PCI-to-PCI Bridge .
b) If error conditions appear, reinstall FlexRIO and the PXIe-5785.
What Should I Do if the PXIe-5785 Fails the Self-Test?
1. Restart the system.
2. Launch MAX, and perform the self-test again.
3. Power off the chassis.
4. Reinstall the failed module in a different slot.
12 | ni.com | PXIe-5785 Getting Started Guide