![background image](http://html1.mh-extra.com/html/national-instruments/pxie-5668r/pxie-5668r_getting-started-manual_3617406008.webp)
Figure 3. Module Installation
2
3
NI PXIe-1075
1
1. Chassis
2. Hardware Module
3. Ejector Handle in Downward (Unlatched) Position
9.
Latch the module in place by pulling up on the ejector handle.
10. Secure the module front panel to the chassis using the front-panel mounting screws.
Note
Tightening the top and bottom mounting screws increases mechanical
stability and also electrically connects the front panel to the chassis, which can
improve the signal quality and electromagnetic performance.
11. Cover all empty slots using filler panels or fill using slot blockers to maximize cooling air
flow.
12. Power on the chassis.
Related Information
on page 6
Interconnecting the NI 5668R Modules
Complete the following steps to interconnect the NI 5668R front panel connectors, as shown
in the following figure.
Caution
The signal pins of this product's input/output ports can be damaged if
subjected to ESD. To prevent damage, remove power from the product before
8
|
ni.com
|
NI PXIe-5668R Getting Started Guide