![background image](http://html1.mh-extra.com/html/national-instruments/pxie-4163/pxie-4163_getting-started-manual_3553448003.webp)
Other Equipment
There are several required items not included in your PXIe-4163 kit that you need to operate
the PXIe-4163. Your application may require additional items not included in your kit to
install or operate your PXIe-4163.
Required Items
•
A PXI Chassis and chassis documentation
•
A PXI Controller or PC with a Device for PXI Remote Control system that meets the
system requirements specified in this guide and chassis documentation
Optional Items
•
PXI Slot Blocker Kit (NI part number 199198-01)
•
SHDB62M-DB62M-LL Low Leakage Cable for SMU, 62 D-Sub Male to 62 D-Sub Male
–
1 m (NI part number 142947B-01)
–
2 m (NI part number 142947B-02)
•
SHDB62M-BW-LL Low Leakage Cable for SMU, 62 D-Sub Male to Bare Wire Male
–
1 m (NI part number 142948A-01)
–
2 m (NI part number 142948A-02)
•
62-Pin Connector Kit for PXIe-416
x
SMUs (NI part number 785582-01)
Visit
for more information about these additional items.
Preparing the Environment
Ensure that the environment you are using the PXIe-4163 in meets the following
specifications:
Temperature and Humidity
Temperature
Operating
Chassis with slot cooling
capacity ≥58 W
1
0 °C to 55 °C
All other compatible chassis
0 °C to 40 °C
Storage
-40 °C to 71 °C
1
Not all chassis with slot cooling capacity ≥58 W can achieve this ambient temperature range. Refer
to PXI chassis specifications to determine the ambient temperature ranges your chassis can achieve.
PXIe-4163 Getting Started Guide
|
© National Instruments
|
3