background image

Figure 1. Chassis Compatibility Symbols

NI PXIe-1062Q

1

2

3

4

5

1. PXI Express System Controller Slot
2. PXI Peripheral Slot
3. PXI Express Hybrid Peripheral Slot
4. PXI Express System Timing Slot
5. PXI Express Peripheral Slot

7. Touch any metal part of the chassis to discharge static electricity.
8. Ensure that the ejector handle is in the downward (unlatched) position.
9. Place the module edges into the module guides at the top and bottom of the

chassis. Slide the module into the slot until it is fully inserted.

10. Latch the module in place by pulling up on the ejector handle.
11. Secure the module front panel to the chassis using the front-panel mounting

screws.

Note

 Tightening the top and bottom mounting screws increases

mechanical stability and also electrically connects the front panel to

the chassis, which can improve the signal quality and

electromagnetic performance.

12. Cover all empty slots using EMC filler panels or fill using slot blockers to

maximize cooling air flow, depending on your application.

13. Power on the chassis.

Related tasks

Why Is the ACCESS LED Off When the Chassis Is On?

© National Instruments

7

PXIe-4162

Содержание PXIe-4162




















Отзывы: