National Instruments PXIe-4162, Руководство по началу работы

Страница: 1 / 20

GETTING STARTED GUIDE
PXIe-4162
PXIe, 12-Channel, ±24 V, 100 mA PXI Source Measure Unit
This document explains how to install, configure, and test the PXIe-4162. The PXIe-4162
ships with NI-DCPower driver software, which you can use to program the module.
Note Before you begin, install and configure your chassis and controller.
Contents
Verifying the System Requirements..........................................................................................1
Unpacking the Kit..................................................................................................................... 1
Other Equipment....................................................................................................................... 3
Preparing the Environment....................................................................................................... 3
Installing the Software.............................................................................................................. 4
Installing the PXIe-4162........................................................................................................... 4
PXIe-4162 Pinout and LEDs.....................................................................................................6
Configuring the PXIe-4162 in MAX...................................................................................... 12
Self-Calibrating the PXIe-4162.............................................................................................. 13
Programming the PXIe-4162.................................................................................................. 14
Troubleshooting...................................................................................................................... 16
What Should I Do if the PXIe-4162 Doesn't Appear in MAX?......................................16
Why Is the ACCESS LED Off When the Chassis Is On?...............................................17
What Should I Do if the PXIe-4162 Fails the Self-Test?................................................17
Where To Go Next.................................................................................................................. 18
Worldwide Support and Services............................................................................................ 18
Verifying the System Requirements
To use the NI-DCPower instrument driver, your system must meet certain requirements.
Refer to the product readme, which is available on the driver software media or online at
ni.com/manuals , for more information about minimum system requirements, recommended
system, and supported application development environments (ADEs).
Unpacking the Kit
Refer to the following figure to identify the contents of the PXIe-4162 kit.