background image

INSTALLATION GUIDE

PXI and PXI Express Chassis Fan 
Replacement

This guide describes how to replace the fan on a PXI and PXI Express 
chassis.

Cautions

Make sure to unplug the power cord before replacing the fan. 

Only trained service personnel should replace the fan.

4–6 and 9 Slot Chassis Fan Replacement

Note

Fan replacement is supported only on chassis with specific assembly numbers. The 

supported model numbers are listed below, followed by their supported assembly numbers 
in parentheses. The 

x

 denotes the assembly letter revision.

Before replacing the fan, be sure to check the model and assembly numbers on the back of 
your PXI chassis. Replace the fan only if the model and assembly numbers are on the 
following list. Refer to th

NI PXI-103x and NI PXIe-1073 Chassis Fan Replacement

 

section for information about previous revisions.

NI PXI-1031 (190871

x

-01, Revision L and newer)

NI PXI-1031DC (191746

x

-01, Revision H and newer)

NI PXI-1033 (194918

x

-01, Revision E and newer)

NI PXI-1036 (192592

x

-01, Revision H and newer)

NI PXI-1036DC (192593

x

-01, Revision F and newer)

NI PXIe-1071 (195659

x

-01L)

NI PXIe-1073 (196695

x

-01, Revision D and newer)

NI PXIe-1078 (199485

x

-01L)

Refer to Figure and the following steps for installation and removal 
instructions.

Содержание PXI Series












Отзывы: