Chapter 2
Installation and Configuration
PXI-GPIB/PMC-GPIB for Windows NT
2-4
©
National Instruments Corporation
4.
Insert the PMC-GPIB into the slot as shown in Figure 2-2. It might be
a tight fit, but do not force the board into place.
Figure 2-2.
Installing the PMC-GPIB
5.
Use the mounting hardware provided to fasten the PMC-GPIB to the
host.
6.
Reinstall the host, if you removed it to install the PMC-GPIB.
7.
Turn on your system and start Windows NT.
The PMC-GPIB hardware installation is now complete. Proceed to the next
section,
1
Host Face Plate
2
PMC-GPIB Board
3
+5 V Voltage Key
4
Mounting Screws
1
4
2
3