Chapter 2
Installation and Configuration
©
National Instruments Corporation
2-15
System CMOS
The NI PXI-8101/8102 contains a backed-up memory used to store BIOS
configuration information.
Complete the following steps to clear the CMOS contents:
1.
Power off the chassis.
2.
Remove the controller from the chassis.
3.
Press and hold down push-button switch SW2 for 2 to 3 seconds.
The switch location is shown in Figure 2-3.
4.
Reinstall the controller in the chassis.
Figure 2-3.
Clearing the CMOS Contents
1
P
us
h-B
u
tton
S
witch
S
W2
1
