Quick Start Guide
Phase Matrix PXI-1430B RF Downconverter Module
33
Equipment Setup to Confirm Basic Module Operation
Figure 16
Equipment Setup to Confirm Basic Module Operation
IF Center Frequency and Bandwidth Check
1
Connect the equipment as shown in
•
Connect the RF Output of the Signal Generator
to RF B IN of the PXI-1430B.
•
Connect the LO OUT of the PXI-1450B Local Oscillator Module
to LO B IN of the PXI-1430B.
•
Connect the REF B OUT of the
PXI-1450B Local Oscillator Module
to REF B IN of the PXI-1430B.
•
Connect the IF B OUT of the PXI-1430B
to the RF Input of the Spectrum Analyzer.
2
Set the Signal Generator frequency to 1.5 GHz and the output power
to -40 dBm.
3
Set the LO frequency to 4.75 GHz.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PXI-1430
%
TO RF B IN
The rain in Spain
Falls mainly on the plains
LOCAL
OSCILLATOR
FROM
IF B OUT
TO LO B IN
TO REF B IN
C A U T I O N
The maximum power input to the input connector (RF B IN 100 kHz to 2.9 GHz) must
not 10 dBm!
