Note
Do not install a device if it appears damaged in any way.
3.
Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.
Verifying the Kit Contents
Verify that the following items are included in the PCIe-6593 kit.
Figure 1. PCIe-6593 Kit Contents
DIO
PORT 1
REF/
CLK IN
4 Vpp MAX
CLK
OUT
PORT 0
PCIe-6593
1
2
3
1. PCIe-6593
2. PCIe-6593 Safety, Environmental, and Regulatory Information
3. PCIe-6593 Getting Started Guide
Recommended Cables (Not Included)
Choose from the following cables to make your high-speed serial connection.
•
QSFP28 Active Optical Cable
–
10 m: NI part number 788257-10
•
QSFP28 Passive Cable
–
0.5 m: NI part number 788256-0R5
–
1 m: NI part number 788256-01
–
2 m: NI part number 788256-02
Notice
When the system is deployed at the upper environmental specification of
the PCIe-6593, standard rated QSFP28 active optical cables may exceed their
operating case temperature range. To ensure the cable case temperature remains
within its operating temperature range, monitor the built-in temperature sensor of the
cable throughout deployment.
Note
To convert a QSFP28 signal to a Molex Nano-Pitch signal compatible with
other NI modules, use the SCB-12, NI part number 787419-01.
To purchase high-speed serial cables and the SCB-12, search the NI part number at ni.com.
PCIe-6593 Getting Started Guide
|
© National Instruments Corporation
|
3
