![background image](http://html1.mh-extra.com/html/national-instruments/pcie-5763/pcie-5763_getting-started-manual_709880014.webp)
5.
Verify the PCIe-5763 appears in the Device Manager.
a)
Under an NI entry, confirm that a PCIe-5763 entry appears.
Note
If you are using a PC with a device for PXI remote control system,
under
System Devices
, also confirm that no error conditions appear for the
PCI-to-PCI Bridge
.
b)
If error conditions appear, reinstall FlexRIO and the PCIe-5763.
What Should I Do if the PCIe-5763 Fails the Self-Test?
1.
Restart the system.
2.
Launch MAX, and perform the self-test again.
3.
Power off the chassis.
4.
Reinstall the failed module in a different slot.
5.
Power on the chassis.
6.
Perform the self-test again.
Where to Go Next
Refer to the following figure for information about other product tasks and associated
resources for those tasks.
SUPPORT
Services
ni.com/services
NI Community
ni.com/community
Support
ni.com/support
SOFTWARE
HARDWARE
Configuring a Project
FlexRIO Help
Learn LabVIEW Basics
ni.com/gettingstarted
FlexRIO Examples
NI Example Finder
PCIe-5763 Specifications
ni.com/manuals
14
|
ni.com
|
PCIe-5763 Getting Started Guide