Figure 2.
Installing a PCI Express Device
1
3
2
1. PCI Express Device
2. PCI Express System Slot
3. PC with PCI Express Slot
7. Secure the device mounting bracket to the back panel rail of the computer.
Note
If you will be using the NI Camera Link I/O Extension Board (PCIe),
refer to the
NI Camera Link I/O Extension Board (PCIe) User Guide
for
installation instructions.
8. Replace the computer cover.
9. Connect the Camera Link cable(s) to a Camera Link-compatible camera. Refer to the
camera manufacturer documentation for specific instructions about how to connect the
cable to your camera.
10. Connect the other end of the Camera Link cable(s) to the 26-pin SDR Camera Link
connector(s) on the front panel. Tighten the retention screws to secure the cable(s) to the
connector(s).
Note
If connecting two cables, ensure that one cable connects the Base
connector of the camera to the Base connector of the NI PCIe-1437 and one
cable connects the Med/Full/Ext connector of the camera to the Med/Full/Ext
connector of the NI PCIe-1437. Crossing the cables will lead to the
NI PCIe-1437 being unable to communicate with the camera.
11. Plug in and power on the computer.
The NI PCIe-1437 is now installed and the camera is connected.
6
|
ni.com
|
NI PCIe-1437 Getting Started Guide
Содержание PCIe-1437
Страница 1: ...PCIe 1437...
