background image

Software Installation and Configuration

Chapter 3

PCI-GPIB for Digital UNIX

3-2

© National Instruments Corp.

where 

XXX

 is a three-digit number corresponding to the version number.  If

you have installed and removed the driver, the same message appears
without the word 

installed

.

You must be a super user to remove the driver from the kernel
configuration.  To remove the driver, enter the following command:

/usr/sbin/setld -d PCIGPIB

XXX

where 

XXX

 is a three-digit number corresponding to the version number.

Install the Software

After you have removed any existing driver for the PCI -GPIB, follow these
steps to install your NI-488.2M software.  Remember you must be a super
user to install the software.

1.

Run the system utility 

setld

 to install the software.  The commands

you enter depend on whether you are installing the software from tape
or diskette.

If you are installing from tape, insert the distribution tape into the tape
drive and enter the following command:

/usr/sbin/setld -l /dev/rmt0h

If you are installing from diskette, insert the distribution diskette into
the disk drive and enter the following commands:

mkdir /tmp/pcigpib
cd /tmp/pcigpib
tar xvf  /dev/

rfd0a

/usr/sbin/setld -l  .
cd  ..
rm -r pcigpib

where 

/dev/

rfd0a

 is the special file for your floppy disk drive.  If

you do not know the name of your floppy disk special file, ask your
system administrator.

Содержание PCI-GPIB




































Отзывы: