National Instruments PCI-8430, Руководство пользователя

Страница: 85 / 237

Using Static IP Parameters
If DHCP is not available, you must provide the serial ENET interface with
several important network parameters. These parameters are listed
below.
IP address —The unique, computer-readable address of a device
on your network. An IP address typically is represented as four
decimal numbers separated by periods (for example,
130.164.54.20
). Refer to Choosing a Static IP Address .
Subnet mask —A code that helps the network device determine
whether another device is on the same network or a different
network.
Gateway IP —The IP address of a device that acts as a gateway,
which is a connection between two networks. If your network does
not have a gateway, set this parameter to
0.0.0.0 .
DNS Server —The IP address of a network device that stores
hostnames and translates them into IP addresses. If your network
does not have a DNS server, set this parameter to
0.0.0.0 .