National Instruments PCI-7041 Скачать руководство пользователя | Manualshive

Страница: 17 / 37

background image

Chapter 1

Introduction

©

National Instruments Corporation

1-9

PCI-7041 User Manual

application. If the board is booted with the No App switch in the On (left)
position (refer to Figure 1-3), no startup application runs. For more
information on startup applications, refer to the

LabVIEW RT User Manual

.

Switch S2 is the Safe Mode switch, referred to as the Recover switch on
the board. Normally, the PCI-7041 boots and runs LabVIEW RT from the
CompactFlash. If the CompactFlash becomes corrupted, the Safe Mode
switch puts the board into safe mode, which allows you to reload the
software onto the CompactFlash. To put the board into safe mode, set the
Safe Mode switch to the On (left) position (refer to Figure 1-3) and reset
the board.

Switch S3 is the Redirect switch. Setting this switch to the On (left)
position and resetting the board causes the PCI-7041 to output boot status
and software status messages to the accessory board serial port. To view
these messages, connect the serial port to your computer’s serial port via
a serial crossover (null modem) cable. Use a terminal program such as
Hyperterm and open a connection to the computer serial port with the
following settings: 9,600 Baud, 8 data, 1 stop, no flow control. Be sure to
set the Redirect switch to the Off (right) position (refer to Figure 1-3) if you
plan to use the serial port for any reason other than to see these messages.
Setting this switch to On causes the PCI-7041 to boot more slowly than
normal.

Battery

The battery on the PCI-7041 keeps the clock running when the board is
powered off. It is a sealed Lithium battery that should last five years or
more. If you need to replace it, contact National Instruments. The battery
manufacturer is Tadiran (

www.tadiranbat.com

), and the part number is

TL-5186.

National Instruments Software

National Instruments has developed several software kits you can use with
the PCI-7041. The software is already installed on your flash drive.

The PCI-7041 is specifically designed to use LabVIEW RT. For more
information, refer to the

LabVIEW RT User Manual

and the

PCI E Series

User Manual

.

«
...
15
16
17
18
19
...
»

Содержание PCI-7041






































Отзывы:

Нет отзывов

Похожие инструкции для PCI-7041

Бренд: ZETR Страницы: 2

Ray 3 Plus Client

Бренд: Sun Microsystems Страницы: 6

Бренд: DBM Страницы: 50

Бренд: National Instruments Страницы: 5

Бренд: National Instruments Страницы: 76

Бренд: T&D Страницы: 122

Бренд: VideoWave Страницы: 12

Бренд: DFRobot Страницы: 30

Бренд: ICS ELECTRONICS Страницы: 4

Бренд: ATI Technologies Страницы: 87

cPCIS-1100 Series

Бренд: ADLINK Technology Страницы: 48

Digital Loudspeaker

Бренд: Dolby Laboratories Страницы: 4

Бренд: Xinje Страницы: 76

Бренд: Juniper Страницы: 6

Бренд: Ciara Страницы: 14

ULTRIX-FM-NS-1RU

Бренд: Ross Страницы: 5

Бренд: Aerotech Страницы: 62

Threat Analysis Reporter TAR

Бренд: 8e6 Technologies Страницы: 76

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды