National Instruments PCI-232/2 Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 64

National Instruments PCI-232/2 Скачать руководство пользователя страница 27

©

National Instruments Corporation

3-1

PCI Serial for Windows 95

3

Configuration

This chapter contains instructions to help you view or change the
communication port settings.

Change/View Communication Port Settings

The serial configuration utility is fully integrated with the Windows 95
Device Manager. You can use it to examine or modify the configuration of
the serial port.

Follow these steps to configure the serial port. Repeat the configuration
procedure for each serial port in your system.

1.

Select Start»Settings»Control Panel and double-click on the
System icon. The System Properties window appears.

2.

Select the Device Manager tab, and click the View devices by type
button at the top of the page.

3.

Double-click the Ports (COM & LPT) icon.

4.

Double-click on the name of the port you want to configure.

You can now view or change information about your serial port in the
following ways:

•

Click on the Resources tab to view information about the hardware
resources assigned to the serial port.

•

Click on the Port Settings tab to view information about the software
configuration for the serial port. Refer to the next section,

Communication Port Settings

, for more information.

•

On the Port Settings tab, click on the Advanced button to change the
RS-485 transceiver mode and to enable or disable the FIFOs on the
serial hardware. Refer to the next section,

Communication Port

, for more information.

Note

Transceiver modes apply to RS-485 interfaces only. For more information about
transceiver modes, refer to Chapter 4,

Using Your Serial Hardware

«
...
25
26
27
28
29
...
»

Содержание PCI-232/2

































































Отзывы:

Нет отзывов