National Instruments NI Vision 17 Series, Руководство пользователя

Страница: 87 / 88

Index
I-2 | ni.com
I
I/O connector, 3-3
image readout duration, 6-7
image sensor
binning, 5-3
field of view, 5-1
gain, 5-4
hardware binarization, 5-4
maintenance, 5-5
spectral response, 5-2
image, acquisition, 6-1
IMG ACQ LED, 7-4
instrument drivers (NI resources), C-1
IP address
assigning, 1-6
configuring for LabVIEW, 2-5
configuring with Vision Builder AI, 2-2
using a DHCP server, 1-6
IP, RESET DIP switch, 7-5
K
KnowledgeBase, C-1
L
LabVIEW
acquiring an image, 2-6
configuring the IP address, 2-5
documents,
xii
installing software on the smart
camera, 2-6
smart camera configuration, 2-4
LED indicators, 7-1
lighting
files, 4-3
turn-on time, 6-4
LUT (lookup table) See hardware binarization
M
mounting information, 8-1
N
National Instruments support and
services, C-1
network connection, 1-5
NI 17xx
binning, 5-3
communicating with the console, 4-10
connecting
an external lighting controller, 4-5
an isolated output to a sinking
external load, 4-9
sinking output sensors to isolated
inputs, 4-8
to a quadrature encoder, 4-10
to serial devices, 4-10
device initialization, 7-2
dimensions, 8-2
Ethernet LEDs, 3-4
hardware, binarization, 5-4
lighting files, 4-3
models, 1-2
partial scan mode, 5-3
power requirements, 1-5
protecting against inductive loads, 4-9
selecting a light, 4-4
thermal considerations, 8-1
troubleshooting, B-1
NI Vision Acquisition Software,
documents, xiii
NI Vision Builder for Automated Inspection
acquiring an image, 2-3
configuring the IP address, 2-2
documents,
xii
installing on the smart camera, 2-3
smart camera configuration, 2-2
NI Vision Development Module,
documents, xii
NI-IMAQdx, documents, xiii
NO APP DIP switch, 7-5