NI USB-9264 User Guide and Specifications
8
ni.com
Installing the NI USB-9264 Device
Before installing the device, you must install the software you plan to use
with the device. Refer to the
section of this guide
and the documentation included with the software for more information.
Installing the NI 9264 Module into the NI USB-9162 Carrier
The NI 9264 module and NI USB-9162 carrier are packaged separately.
Refer to Figure 5, while completing the following assembly steps:
1.
Make sure that no signals are connected to the NI 9264 module and the
USB cable is not attached to the USB-9162 carrier.
2.
Remove the protective cover from the 15-pin D-SUB connector.
3.
Align the I/O module with the carrier, as shown in Figure 5.
Figure 5.
Module Installation
4.
Squeeze the latches and insert the NI 9264 module into the
NI USB-9162 carrier.
5.
Press firmly on the connector side of the NI 9264 module until the
latches lock the module into place, as shown in Figure 6.
Figure 6.
Locking Module into Place