National Instruments NI TB-2627, Руководство по установке

Страница: 6 / 15

© National Instruments Corporation 5 NI TB-2627 Installation Instructions
Caution In order to comply with standards and laws governing electromagnetic
compatibility (EMC), you must install the NI 711627-01 snap-on ferrite shipped with the
NI TB-2627 terminal block. Install the ferrite as close to the NI TB-2627 terminal block as
possible. Wrap all wires exiting the terminal block around one side of the ferrite so that
they pass through the ferrite twice, as shown in Figure 2 and Figure 3.
Figure 2. Open Ferrite Near Ends of Power Wires
Figure 3. Closed Ferrite