Chapter 2
Installation and Configuration
NI PXIe-8103 User Manual
2-4
ni.com
How to Remove the Controller from the PXI Express Chassis
The NI PXIe-8103 controller is designed for easy handling. To remove the
unit from the PXI Express chassis, complete the following steps.
1.
Power off the chassis.
2.
Unscrew the bracket-retaining screws in the front panel.
3.
Press the injector/ejector handle down.
4.
Slide the unit out of the chassis.
BIOS Setup
You can change the NI PXIe-8103 configuration settings in the BIOS
setup. The BIOS is the low-level interface between the hardware and PC
software that configures and tests your hardware when you boot the system.
The BIOS setup program includes menus for configuring settings and
enabling NI PXIe-8103 controller features.
Most users do not need to use the BIOS setup program, as the
NI PXIe-8103 controller ships with default settings that work well for most
configurations.
Caution
Changing BIOS settings may lead to incorrect controller behavior and possibly
an unbootable controller. If this happens, follow the instructions for restoring default
settings in the
System CMOS
section. In general, do
not
change a setting unless you are
absolutely certain what it does.
Entering BIOS Setup
To start the BIOS setup utility, complete the following steps:
1.
Power on or reboot your NI PXIe-8103 controller.
2.
When the message
Press <DEL> to enter SETUP
appears, press
the Delete key on the keyboard. The message
Entering Setup
appears, and the setup program is loaded after a short delay.
3.
When you first enter the BIOS setup program, it displays the
Main
menu.
Use the following keys to navigate through the BIOS setup:
•
Left Arrow, Right Arrow
—Use these keys to move between the
different setup menus. If you are in a submenu, these keys have no
effect, and you need to press <Esc> to leave the submenu first. (To use
the arrows on the numeric keypad, you must turn off Num Lock.)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com