National Instruments NI PXIe-5645R Скачать руководство пользователя | Manualshive

Страница: 2 / 24

background image

Troubleshooting...................................................................................................................... 21

Why Is the ACCESS LED Off When the Chassis Is On?.............................................. 21
What Should I Do if the NI 5645R Doesn't Appear in MAX?....................................... 21

Where to Go Next................................................................................................................... 23
Worldwide Support and Services............................................................................................23

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits provide reasonable protection against harmful interference when the product is
operated in the intended operational electromagnetic environment.

This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with
radio and television reception and prevent unacceptable performance degradation, install and
use this product in strict accordance with the instructions in the product documentation.

Furthermore, any changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate it under your local regulatory rules.

Caution

To ensure the specified EMC performance, operate this product only with

shielded cables and accessories.

Caution

To ensure the specified EMC performance, operate this product only with

cables less than 3 meters in length.

Verifying the System Requirements

To use the NI 5645R, your system must meet certain requirements. For more information
about minimum system requirements, recommended system, and supported application
development environments (ADEs), refer to the readme, which is available on the software
media or online at

ni.com/updates

Unpacking the Kit

Caution

To prevent electrostatic discharge (ESD) from damaging the device,

ground yourself using a grounding strap or by holding a grounded object, such as
your computer chassis.

1.

Touch the antistatic package to a metal part of the computer chassis.

2.

Remove the device from the package and inspect the device for loose components or any
other sign of damage.

Caution

Never touch the exposed pins of connectors.

2

|

ni.com

|

NI PXIe-5645R Getting Started Guide

«
1
2
3
4
...
»

Содержание NI PXIe-5645R

























Отзывы:

Нет отзывов

Похожие инструкции для NI PXIe-5645R

Бренд: Camsat Страницы: 2

Бренд: Camsat Страницы: 2

Бренд: Ebode Страницы: 24

Бренд: R&S Страницы: 70

Бренд: Harman Страницы: 30

THERMASGARD TM 65

Бренд: S+S Regeltechnik Страницы: 16

PREMASGARD 211 Series

Бренд: S+S Regeltechnik Страницы: 11

Бренд: V2 Страницы: 16

Бренд: Strong Страницы: 25

vigilantplant EJA Series

Бренд: YOKOGAWA Страницы: 79

Бренд: IRiver Страницы: 2

Бренд: Hokuyo Страницы: 2

Бренд: AstroStart Страницы: 2

Бренд: Datavideo Страницы: 15

Бренд: Yaesu Страницы: 20

Бренд: BDStar Страницы: 44

Бренд: Onkyo Страницы: 285

Бренд: B&K Страницы: 88

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды