manualshive.com logo in svg

National Instruments NI PXI-7852, Руководство пользователя

Национальные инструменты NI PXI-7852 - мощная плата сбора данных для автоматизированных систем тестирования и измерения. Бесплатное руководство пользователя можно скачать с manualshive.com для подробной информации о функциях и настройке этого продукта. Легко загрузить и начать использовать!

Поделиться
Скачать
background image

 

Compliance

Compliance with FCC/Canada Radio Frequency Interference 
Regulations

Determining FCC Class

The Federal Communications Commission (FCC) has rules to protect wireless communications from interference. The FCC 
places digital electronics into two classes. These classes are known as Class A (for use in industrial-commercial locations only) 
or Class B (for use in residential or commercial locations). All National Instruments (NI) products are FCC Class A products.

Depending on where it is operated, this Class A product could be subject to restrictions in the FCC rules. (In Canada, the 
Department of Communications (DOC), of Industry Canada, regulates wireless interference in much the same way.) Digital 
electronics emit weak signals during normal operation that can affect radio, television, or other wireless products.

All Class A products display a simple warning statement of one paragraph in length regarding interference and undesired 
operation. The FCC rules have restrictions regarding the locations where FCC Class A products can be operated.

Consult the FCC Web site at 

www.fcc.gov

 for more information.

FCC/DOC Warnings

This equipment generates and uses radio frequency energy and, if not installed and used in strict accordance with the instructions 
in this manual and the CE marking Declaration of Conformity*, may cause interference to radio and television reception. 
Classification requirements are the same for the Federal Communications Commission (FCC) and the Canadian Department 
of Communications (DOC). 

Changes or modifications not expressly approved by NI could void the user’s authority to operate the equipment under the 
FCC Rules.

Class A

Federal Communications Commission

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated 
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and 
used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this 
equipment in a residential area is likely to cause harmful interference in which case the user is required to correct the interference 
at their own expense.

Canadian Department of Communications

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

Compliance with EU Directives

Users in the European Union (EU) should refer to the Declaration of Conformity (DoC) for information* pertaining to the 
CE marking. Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory compliance 
information. To obtain the DoC for this product, visit 

ni.com/certification

, search by model number or product line, 

and click the appropriate link in the Certification column.

* The CE marking Declaration of Conformity contains important supplementary information and instructions for the user or 

installer.

Содержание NI PXI-7852












































































Отзывы:

Нет отзывов

Похожие инструкции для NI PXI-7852

T&D TR71A Quick Start Manual preview
TR71A
Бренд: T&D Страницы: 2
WITTE flinkey Box Installation Manual preview
flinkey Box
Бренд: WITTE Страницы: 45
Meilhaus Electronic RedLab WebDAQ 316 User Manual preview
RedLab WebDAQ 316
Бренд: Meilhaus Electronic Страницы: 31
ALAT UJI OM-CP-PR2000 User Manual preview
OM-CP-PR2000
Бренд: ALAT UJI Страницы: 25
Escort iMiniPlus PDF User Manual preview
iMiniPlus PDF
Бренд: Escort Страницы: 28
Jetter JVM-104-O16 User Manual preview
JVM-104-O16
Бренд: Jetter Страницы: 66
Racelogic VB20SL3 Manual preview
VB20SL3
Бренд: Racelogic Страницы: 4
Racelogic VBOX Touch V2 Quick Start Manual preview
VBOX Touch V2
Бренд: Racelogic Страницы: 15
Radionode RN400-H2PS User Manual preview
RN400-H2PS
Бренд: Radionode Страницы: 23
Ebro EBI-125 A Manual preview
EBI-125 A
Бренд: Ebro Страницы: 26
GE MapSight Tech Tip preview
MapSight
Бренд: GE Страницы: 5
GRAPHTEC GL820 Quick Start Manual preview
GL820
Бренд: GRAPHTEC Страницы: 22
SS Telecoms SS-77 uTMS User Manual preview
SS-77 uTMS
Бренд: SS Telecoms Страницы: 37
KeeLog SerialGhost DB-25 User Manual preview
SerialGhost DB-25
Бренд: KeeLog Страницы: 33
Wohler CDL 210 Operating Manual preview
CDL 210
Бренд: Wohler Страницы: 28
Wohler LOG 220 Operation Manual preview
LOG 220
Бренд: Wohler Страницы: 30
Microtronics myDatalogNANOamr User Manual preview
myDatalogNANOamr
Бренд: Microtronics Страницы: 125
Microtronics myDatalogNANO User Manual preview
myDatalogNANO
Бренд: Microtronics Страницы: 132

Бренды по названию

Популярные бренды

Загрузить еще бренды