National Instruments NI PCI-5922 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 21

National Instruments NI PCI-5922 Скачать руководство пользователя страница 4

4

|

ni.com

|

NI 5922 Calibration Procedure

Documentation

Consult the following documents for information about the NI 5922 and your application
software. All documents are available on

and help files install with the software.

Self-Calibration Procedures

The NI 5922 includes precise internal circuits and references used during self-calibration to
adjust for time and temperature drift. The oscilloscope gain, offset, and flatness are all corrected
in self-calibration. Measuring the accuracy of these internal calibration circuits with another
instrument during external calibration provides traceability for the verification procedure.
Absolute accuracy is ensured by compensating for any error measured in the internal references.

Note

Self-calibrate the oscilloscope before you perform verification. NI-SCOPE

includes self-calibration example programs for LabVIEW, CVI, and
Microsoft Visual C.

You can initiate self-calibration using Measurement & Automation Explorer (MAX), using the
Scope Soft Front Panel (SFP), or programmatically using NI-SCOPE.

NI PXI/PCI-5922 Getting Started Guide

Contains: NI-SCOPE installation, hardware installation, and hardware
programing instructions

NI PXI/PCI-5922 Specifications

Contains: NI 5922 specifications and calibration intervals

NI-SCOPE Readme

Contains: Operating system and application software support in NI-SCOPE

NI High Speed Digitizers Help

Contains: Detailed information about NI PXI/PCI-5922

NI-SCOPE LabVIEW Reference Help

Contains: LabVIEW programming concepts and reference information about
NI-SCOPE VIs and functions

NI-SCOPE Function Reference Help

Contains: Reference information for NI-SCOPE C functions and NI-SCOPE
C properties

«
...
2
3
4
5
6
...
»

Содержание NI PCI-5922






















Отзывы:

Нет отзывов