![background image](http://html1.mh-extra.com/html/national-instruments/ni-mid-7604/ni-mid-7604_overview_3404913002.webp)
Stepper and Servo Motor Drives
643
National Instruments • Tel: (800) 433-3488 • Fax: (512) 683-9300 • [email protected] • ni.com
Stepper and Servo Motor Drives
Motion
The specifications below apply to only the MID-76xx. Please refer to your controller specifications
to determine overall system specifications.
Some signals define compatibility as pass-through. This means the MID 76xx may have passive filtering
on these signals, but the signals do not affect the voltage range. Consult your motion controller
specifications to determine allowable voltage range and logic level compatibility of the signal.
MID-7604, MID-7602 Stepper Motor Drives
Driver type ........................................................ IM481H modular hybrid, bipolar chopper
Chopping operating frequency......................... 20 kHz
Motor bus voltage............................................ 24 VDC nominal
Current per phase............................................. 0.2 to 1.4 A
peak
(0.14 to 1 A
rms
)
(factory setting is 0.2 A
peak
)
Microstepping selections................................. x2, 4, 8, 16, 32, 64, 128, 256
x5, 10, 25, 50, 125, 250
Power Supply
Input voltage .................................................... 90-138 VAC/204-264 VAC, 47-63 Hz
Input fuse ......................................................... 1.5 A, 230 VAC
3 A, 115 VAC
Input fuse dimensions...................................... 5 x 20 mm
Host Bus Voltage Interlock
PC bus host voltage monitoring range............. 5 VDC
Physical
Dimensions....................................................... 30.6 by 25.4 by 4.4 cm (12.1 by 10.0 by 1.7 in.)
Weight ............................................................ 4.5 kg (10 lb)
MID-7654, MID-7652 Servo Motor Drives
Driver type ........................................................ Elmo Motion Control VIO 10/100
Peak current limit ............................................. 1.7 to 10 A (default 1.7 A)
Continuous current limit................................... 0.8 to 5 A (default 0.5 A)
DC-bus motor voltage ...................................... 48 VDC nominal
Continuous power (all axes combined)............ 400 W at 25% duty cycle
Power Supply
Input voltage .................................................... 90-132 VAC/198-264 VAC, 47-63 Hz
Input fuse ......................................................... 6 A, 230 VAC, 8 A, 115 VAC
Input fuse dimensions...................................... 0.25 by 1.25 in.
Host Bus Voltage Interlock
PC bus host voltage monitoring range............. 5 VDC ±5%
Physical
Dimensions....................................................... 30.6 by 25.4 by 8.8 cm (12.0 by 10.0 by 3.5 in.)
Weight ............................................................ 10.2 kg (22.5 lb)
General (All MID 76xx drives)
Encoder Interface (Each Axis)
Inputs................................................................ Quadrature, incremental
Differential input threshold.............................. ±0.3 V (typical)
Single-ended input threshold........................... TTL/CMOS
Voltage range ................................................... 0 to 5 VDC
Maximum quadrature frequency...................... 20 MHz
Inhibit, Limit, and Home Switch Inputs (Each Axis)
Voltage range ................................................... 0 to 12 VDC
Compatibility .................................................... Signal pass-through
Trigger Input
Noise filter (RC time constant) ........................ 100 ns
Compatibility .................................................... Signal pass-through
Breakpoint Output
Compatibility .................................................... Signal pass-through
Analog Input
Noise filter (RC time constant) ........................ 10 µs
Compatibility .................................................... Signal pass-through
Analog Output
Compatibility .................................................... Signal pass-through
Safety
Installation category II, pollution degree 2
Environment
Operating temperature..................................... 0 to 50 ˚C for 765x, 0 to 45 ˚C for 760x
Storage temperature ........................................ -20 to 70 ˚C
Relative humidity ............................................. 10% to 90% (noncondensing)
Specifications
NI MID-7604 (4-axis stepper)................................................777936-0P
NI MID-7602 (2-axis stepper)................................................778003-0P
NI MID-7654 (4-axis servo) ...................................................778005-0P
NI MID-7652 (2-axis servo) ...................................................778004-0P
Cables
Refer to the cable guide on page 645.
Accessories
Rack-Mount Kit
MID-760x............................................................................777665-01
MID-765x............................................................................187374-01
Strain-Relief Bar for MID-76xx ..............................................187407-01
Panel-Mount Kit ......................................................................187243-01
BUY ONLINE!
Visit
ni.com/info
and enter mid7602, mid7604, mid7652,
and/or mid7654.
Ordering Information