![background image](http://html1.mh-extra.com/html/national-instruments/ni-dids-2103/ni-dids-2103_user-manual_3423830175.webp)
NI DIDS-2100 Series User Manual | © National Instruments | 175
4.13 Operating Point Setup Window
The purpose of the Operating Point Table Setup window is to configure two types of operation for automated test
cycles:
Timer Mode:
Configure time-based, sequential operating points to be executed according to a specified time for
each operating point.
Trigger Mode:
Configure triggered operating points to be executed according to one or more process variable
ranges. As long as the specified range is true for the selected process variable, the associated operating point will be
executed.
Up to 40 Flex Control Parameters and up to 50 Operating Points can be implemented. The operating point table
function is manually started, paused, and reset. The operating point table can be imported and exported from/to
a tab-delimited text file, which can be manipulated using spreadsheets. In Timer Mode, the operating points can
be repeated for a specified number of Loops. While Operating Points are enabled, the values for the selected Flex
Control Parameters will be overwritten by the associated values in the table.
Enable OP
Tip Strip: Enable operating point function
Содержание NI DIDS-2103
