8
|
ni.com
|
NI 9760 User Manual
Safety Guidelines
Caution
Do not operate this module in a manner not specified in these operating
instructions. Do not exceed the 60VDC rating. Product misuse can result in a hazard.
You can compromise the safety protection built into the product if the product is
damaged in any way. If the product is damaged, return it to National Instruments for
repair.
Compliance and Certifications
Safety
This product meets the requirements of the following standards of safety for electrical equipment
for measurement, control, and laboratory use:
•
IEC 61010-1, EN 61010-1
•
UL 61010-1, CSA 61010-1
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for electrical equipment
for measurement, control, and laboratory use:
•
EN 61326-1 (IEC 61326-1): Class A emissions; Industrial immunity
•
EN 55011 (CISPR 11): Group 1, Class A emissions
•
AS/NZS CISPR 11: Group 1, Class A emissions
•
FCC 47 CFR Part 15B: Class A emissions
•
ICES-001: Class A emissions
Caution
When operating this product, use shielded cables and accessories.
CE Compliance
This product meets the essential requirements of applicable European Directives as follows:
•
2006/95/EC; Low-Voltage Directive (safety)
•
2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Environmental Management
NI is committed to designing and manufacturing products in an environmentally responsible
manner. NI recognizes that eliminating certain hazardous substances from our products is
beneficial to the environment and to NI customers.
For additional environmental information, refer to the
Minimize Our Environmental Impact
web
page at
ni.com/environment
. This page contains the environmental regulations and
directives with which NI complies, as well as other environmental information not included in
this document.
