National Instruments NI 9512 C Series, Начало работы

Страница: 26 / 41

Getting Started with NI 9512 Modules and AKD Servo Drives
|
© National Instruments
|
25
3. Open the Parameter Load/Save page from the configuration tree and click Factory
Defaults to return the drive settings to the factory default values. Any drive settings not
updated in this document are assumed to be the default values.
4. (Optional) Change the name of the drive from the default name of
no_name
on the AKD
Overview page to a more descriptive name.
Figure 17 shows the AKD Overview page.
Figure 17. AKD WorkBench Overview Page
1 Software Ena b le/Disa b le
2 Command Source
3 Operation Mode
4 Clear Faults
5 Save Configuration Settings to Drive
6 Software Ena b le/Disa b le
7 Drive Active Indicator
8 Software Ena b le Status Indicator
9 Hardware Ena b le Status Indicator
10 Fault Indicator
1 2 4 5 3
7 8 10 9
6