National Instruments NI 9512 C Series, Начало работы

Страница: 20 / 41

Getting Started with NI 9512 Modules and AKD Servo Drives
|
© National Instruments
|
19
Figure 12. Axis Manager Dialog Box
12. Click
OK
to close the
Axis Manager
dialog box. The new axis is added to the
Project
Explorer window.
Note You cannot associate more than one axis with the same C Series module.
When you have finished these steps your LabVIEW project should look similar to the
image in Figure 13.
Figure 13.
Project Explorer Window with Modules in Scan Interface Mode