National Instruments NI-9224, Руководство по началу работы

Страница: 19 / 25

2. Route the wire through the NI 9939 opening and remove
slack from the wiring.
3. Install the Backshell Top Enclosure (1) to the Backshell
Bottom Enclosure (3).
4. Place the Label (5) in the Label Carrier (4) and attach onto
the backshell.
Installing the NI 9939 Using the Cable Retainer
What to Use
• NI 9939 screw terminal connector backshell kit
• 0.05 mm
2
to 1.5 mm
2
(30 AWG to 14 AWG) wire with 6 mm
(0.24 in.) of the insulation stripped
• Slotted screwdriver
18 | ni.com | NI 9224 Getting Started Guide