National Instruments NI 9147, Начало работы

Страница: 8 / 18

1
2
2
1
1. Verify that power is not connected to the I/O connector(s) on the C Series
module. If the system is in a nonhazardous location, the NI-9147 can be
powered on when you install modules.
2. Press the latches on the C Series module.
3. Align the C Series module with a slot and seat it in the slot until the latches
lock in place.
Removing C Series Modules
Verify that power is not connected to the I/O connector(s) on the C Series module
before you remove a module from the NI-9147. If the system is in a nonhazardous
location, the NI-9147 can be powered on when you remove modules.
Connecting the NI-9147
The NI-9147 has the following connectors, LEDs, and buttons.
Connecting the NI-9147 to Ground
You must connect the NI-9147 grounding terminal to the grounding electrode
system of the facility.
ni.com
8
NI-9147 Getting Started