National Instruments NI 9147, Начало работы

Страница: 17 / 18

LED Pattern Indication
by enabling safe mode in MAX. Refer to the Measurement & Automation
Explorer (MAX) Help for information about safe mode.
Blinks four times
and pauses
The NI-9147 is in safe mode. The software has crashed twice without
rebooting or cycling power between crashes.
Continuously blinks The NI-9147 has detected an unrecoverable error. Contact NI for support.
On momentarily
The NI-9147 is booting. No action required.
Off The NI-9147 is in run mode. Software is installed and the operating system is
running.
Table 3. STATUS LED Indicators
Where to Go Next
APPLICATION
SUPPORT
NI Community
ni.com/community
NI CompactRIO
Developer’s Guide
ni.com/compactriodevguide
Software Support
ni.com/info swsupport
Support
ni.com/support
SOFTWARE
CompactRIO Sample
Projects
LabVIEW Create Project
HARDWARE
NI 9147
Specifications
ni.com/manuals
NI 9147
User Manual
ni.com/manuals
C Series Getting
Started Guides
ni.com/manuals
Configuring a Project
NI-RIO Help
Learn LabVIEW Basics
ni.com/gettingstarted
CompactRIO Examples
NI Example Finder
Services
ni.com/services
NI Services
Visit ni.com/support to find support resources including documentation,
downloads, and troubleshooting and application development self-help such as
tutorials and examples.
© National Instruments
17
NI-9147 Getting Started