NI-845x Software and Hardware Installation Guide
|
© National Instruments
|
5
Step 3: Confirm that Your Device Is Recognized
To verify that the USB device is recognized, complete the
following steps:
1. Double-click the
Measurement and Automation
icon on the
desktop to open Measurement and Automation Explorer
(MAX).
2. Expand
Devices and Interfaces
.
3. Verify that the device appears under
USB Devices
. If the
device does not appear, press <F5> to refresh the view in
MAX. If the device is still not recognized, refer to
ni.com/
support/install
for troubleshooting information.
