National Instruments NI-7931, Руководство по началу работы

Страница: 13 / 19

Programming Options
Refer to the following table for information about how to program the NI-7932R.
Component Programming Option(s)
Real-Time controller LabVIEW Real-Time or C/C++ Development Tools for NI Linux
Real-Time, Eclipse Edition.
FPGA LabVIEW FPGA
Related Information
For more information about programming with LabVIEW Real-Time, refer to the NI-7931R/
7932R/7935R User Manual.
For more information about programming with C/C++ development tools, refer to the Getting
Started with C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition tutorial.
Programming with LabVIEW
The Controller for FlexRIO examples provide a starting point for programming with
LabVIEW. To access these examples, open LabVIEW and select
Help » Find Examples »
Hardware Input and Output » Controller for FlexRIO .
For more detailed instructions about programming the NI-7932R with LabVIEW, refer to the
NI-7931R/7932R/7935R User Manual .
Text-based Programming
You can target the NI-7932R Linux Real-Time operating system from text-based development
environments such as C and C++.
Removing the Adapter Module
Complete the following steps to remove an adapter module from the NI-7932R.
1. Disconnect all cables to the adapter module.
2. Power off the NI-7932R.
2
3. Unscrew the adapter module.
4. Remove the adapter module.
Troubleshooting the NI-7932R
Related Information
Connecting the NI-7932R to the Host Computer
on page 8
2
If you cannot power down the NI-7932R, use the System Configuration application programming
interface (API) to disable power to the adapter module.
12 | ni.com | NI-7932R Getting Started Guide