1. Gently insert the guide pins and the high-density card edge of the FlexRIO adapter
module into the corresponding connectors of the NI-7932R.
The connection may be tight, but do not force the adapter module into place.
2. Tighten the captive screws on the FlexRIO adapter module to secure it to the NI-7932R.
The following figure shows the NI-7932R with the FlexRIO adapter module connected.
Figure 2.
NI-7932R with FlexRIO Adapter Module
Refer to the getting started guide for your adapter module for more information about your
adapter module, including programming information.
Configuring the System in Measurement &
Automation Explorer (MAX)
After connecting the NI-7932R to the host computer, complete the following steps to
configure the system for the first time in MAX.
1. Launch MAX on the host computer.
2. Expand
Remote Systems
in the MAX configuration tree and select the system. MAX
lists the system as the model name followed by the serial number, such as
NI-7932R-030521C9.
Related Information
Why Doesn't the Device Appear in MAX?
on page 13
NI-7932R Getting Started Guide
|
© National Instruments
|
9
Содержание NI-7931
Страница 1: ...NI 7931...
