National Instruments NAT7210, Справочное руководство

Страница: 3 / 8

© National Instruments Corporation 3 GPIB ASIC Reference Manual Errata
• Page 3-64, the last paragraph under the Turbo+7210 Mode/
Turbo+9914 Mode section, replace the register name,
ACCR
with the register name,
AUXCR
• Page 3-67, in the paragraph for the Turbo+7210 Mode/Turbo+9914
Mode section, replace the register name,
ACCR
with the register name,
AUXCR
• Page 3-96, in the One-Chip Mode section, replace the existing text,
DO is a don’t care bit. Do not set DO IE. DO may read as 1 or 0
with this new text,
DO indicates that the TNT4882 is an Active Talker and the local
nba message is false, meaning there is no data in the FIFO to send.
• Page 3-109, replace both instances of the existing text,
chip read ISR0
with this new text,
(read ISR2)
• Page 3-118, at the top of the page, under Description , replace the
existing text,
NDAC for 700 ns
with this new text,
NDAC for at least 8 clock cycles
• Page 4-13, in the IEEE 488.2 Service Requesting section, replace the
existing text in that section with the following.
If STBO IE = 1, to request service, issue the reqt auxiliary
command. When the STBO interrupt condition becomes true,