Appendix A
Default Settings
PCI-Based MXI-2 Interfaces for Windows 2000/NT/Me/98
A-4
ni.com
VXI/VME-MXI-2
This section summarizes the hardware and software default settings for the
VXI-MXI-2, VXI-MXI-2/B, and VME-MXI-2.
Hardware Settings
Table A-6.
PCI Tab Default Settings
Editor Field
Default Setting
Low-level register access API support
Enabled
User window size
64 KB
Expansion ROM
Enabled
Table A-7.
VXI-MXI-2 Hardware Default Settings
Hardware Component
Default Setting
Logical address (U43)
1
VXIbus Slot 0/Non-Slot 0 (W2)
Automatic detection
VXIbus local bus (S8, S9)
Both OFF: single
VXI-MXI-2
VXIbus CLK10 routing (W3)
From onboard oscillator
External trigger termination (S2)
OFF: unterminated
SMB CLK10 direction (S3)
OUT: drive CLK10 signal
SMB CLK10 termination (S4)
Ignored; effective only when
S3 is set to IN
Polarity of external SMB CLK10 (S5)
Inverted
MXIbus CLK10 signal (S7)
Receive CLK10 from
MXIbus