National Instruments MXI VXI-PCI8026 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 132

background image

Chapter 1

Introduction and Quick Start

©

National Instruments Corporation

1-7

VXI/VME-PCI8026 for Linux

Hardware Installation

To guard against electrostatic discharge, touch the antistatic plastic
package to a metal part of your computer before removing the PCI-MXI-2
from the package. Install the PCI-MXI-2 in an available PCI slot in your
PCI-based computer.

By default, the PCI-MXI-2 automatically detects whether it should be the
system controller on the MXIbus. Verify that the correct cable end labeled
Connect This End To Device Closest To MXIbus Controller In This Daisy
Chain is attached securely to the PCI-MXI-2. You must connect the cable
this way so that the PCI-MXI-2 can correctly detect whether it should be
the system controller on the MXIbus. For more information, refer to
Chapter 2,

PCI-MXI-2 Configuration and Installation

You received either a VXI-MXI-2 or a VME-MXI-2 in your
VXI/VME-PCI8026 kit. To guard against electrostatic discharge, touch the
antistatic plastic package to a metal part of your computer before removing
the VXI-MXI-2 or VME-MXI-2 from the package. Install the VXI-MXI-2
in the first slot of a VXI chassis, or install the VME-MXI-2 in the first slot
of a VME chassis.

The VXI/VME-MXI-2 default configuration automatically detects whether
it should be the VXI/VMEbus system controller. The VXI/VMEbus system
controllers operate certain VXI/VMEbus lines as required for VXI/VME
systems. Verify that any other VXI/VME devices with system controller
capability that are located in the same chassis are not configured as system
controller. Having more than one device configured as system controller
will damage the VXI/VME system.

For VXI systems that include VME devices, ensure that the VME devices
are not configured in the upper 16 KB (starting from 0xC000) of the
A16 address space. This region is reserved for VXI device configuration
registers, which are used for initializing, configuring, and interacting with
VXI devices. The PCI-MXI-2 and VME-MXI-2 also use this region for this
purpose.

Also ensure that no VXI devices in your system are configured for either
logical addresses 0 or 1. These are the default configurations for the
PCI-MXI-2 and the VXI-MXI-2, respectively.

For more details on the VXI-MXI-2 or VME-MXI-2 hardware, refer to
either Chapter 3,

VXI-MXI-2 Configuration and Installation

, or Chapter 4,

VME-MXI-2 Configuration and Installation

«
...
19
20
21
22
23
...
»

Содержание MXI VXI-PCI8026





































































































































Отзывы:

Нет отзывов

Похожие инструкции для MXI VXI-PCI8026

Relion 670 series

Бренд: ABB Страницы: 66

Бренд: SALUDA MEDICAL Страницы: 61

Бренд: MacDon Страницы: 272

Бренд: MacDon Страницы: 70

Бренд: RASHA PROFESSIONAL Страницы: 11

Бренд: MADRIX Страницы: 24

Бренд: MADRIX Страницы: 28

Бренд: TC Electronic Страницы: 2

Бренд: Bahco Страницы: 131

Бренд: Bahco Страницы: 126

Бренд: Datalogic Страницы: 20

Бренд: Datalogic Страницы: 188

Бренд: SCHUNK Страницы: 2

Бренд: Ganter Norm Страницы: 20

Бренд: Wang Страницы: 146

Бренд: Rigol Страницы: 12

Бренд: Veit Brisay Страницы: 18

Бренд: TECshow Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды