National Instruments MXI Express x4, Инструкция по эксплуатации

Страница: 1 / 10

Set Up Your MXI -Express x4
for PXI Express System
This document explains how to set up your PXI Express MXI system.
What You Need to Get Started
To set up and use your PXI Express MXI system, you need the following:
❑
One NI PCIe-8371/8372 and one NI PXIe-8370
❑
A MXI-Express x4 cable
❑
A host PC with an available x4 (or wider) PCI Express slot
Note
Using a PCI Express slot wider than x4 may result in negotiation down to x1 width,
and therefore limiting bandwidth.
❑
An expansion chassis—the PXI Express/CompactPCI Express chassis
that you control with MXI-Express
Note
Your PXI Express MXI card will work in any standard CompactPCI Express chassis
adhering to the PICMG CompactPCI Express EXP.0 R1.0 specification, or in PXI Express
chassis that are compatible with the PXI Express Hardware Specification , Revision 1.0
or later. Your PCI Express MXI-Express card will work in systems compliant with the
PCI Express Base Specification , Revision 1.0a and PCI Express Card Electromechanical
Specification , Revision 1.0a or later.
Note
For full PXI or PXI Express functionality, refer to the Software Overview section in
the MXI-Express x4 for PXI Express Series User Manual .
Unpacking
Your PXI Express MXI cards are shipped in antistatic packages to prevent
electrostatic damage (ESD) to the devices. ESD can damage several
components on the device.
™