National Instruments Multisystem eXtension Interface NI PXI-8360, Руководство пользователя

Страница: 3 / 18

©
National Instr
u
ments Corporation
3
Set Up
Y
o
ur MX
I-Expr
ess x1 System
Table 1. MXI-Express x1 Connectivity Support From a Host PC Using a Copper Cable
From Host Targets
Slot Type Product
PXI Chassis VXI Chassis PXI Express Chassis MXI-Express RIO
NI PXI-8360 NI PXI-1033
*
NI VXI-8360T NI PXIe-8360 NI PXIe-1073
*
NI 9157
*
NI 9159
*
PCI NI PCI-8361

— † — † — † — † — —
PCI Express x1 NI PCIe-8361
      
PCI Express x1 NI PCIe-8362
      
ExpressCard NI ExpressCard-8360
      
Industrial
Controller NI 3100/3110
*
      
*
Product has an integrated MXI-Express x1 port.
†
These configurations are not supported, even though the front panel MXI connectors are mechanically compatible. For these configurations the boards will likely report a valid cable link via the
front panels LEDs. Since these link scenarios expose a possible data integrity issue that may not be obvious to the user, National Instruments strongly recommends against using these configurations.
Note : For installation instructions and other information concerning the NI PXI-1033, NI PXIe-1073, NI VXI-8360T, NI 9157, NI 9159, and the NI 3100/3110, refer to their respective user manuals.
Note : For full PXI or PXI Express functionality, refer to the Software Installation and Configuration section.
Note : PCI Express host slots will give better throughput and latency performance than PCI slots.