Index
I-2
ni.com
H
hardware overview, 3-1 to 3-7
acquisition, scaling, ROI, 3-5
acquisition window control, 3-6
block diagram (figure), 3-2
bus master PCI interface, 3-5
Camera Link, 3-2 to 3-3
Base configuration, 3-2 to 3-3
Medium configuration, 3-3
data transmission, 3-3
high-speed timing, 3-4 to 3-5
LUTs, 3-3
multiple-tap data formatter, 3-4
scatter-gather DMA controllers, 3-5
SDRAM, 3-4
serial interface, 3-6 to 3-7
start conditions, 3-5 to 3-6
trigger control and mapping circuitry, 3-4
high-speed timing circuitry, 3-4 to 3-5
I
IMAQ PCI-1428
Camera Link, 1-2
configuration, 2-7
installation, 2-6 to 2-7
interfacing Camera Link with
devices, 1-2 to 1-3
optional equipment, 2-2
overview and features, 1-1 to 1-2
requirements for getting started, 2-1 to 2-2
safety information, 2-4 to 2-6
setting up the IMAQ system, 2-2 to 2-3
software programming choices, 1-3 to 1-7
IMAQ Vision Builder, 1-6 to 1-7
integration with DAQ, 1-7
National Instruments IMAQ
Vision, 1-6
NI-IMAQ driver software, 1-5
pattern-matching software for vision
and motion, 1-7
relationship between programming
environment, NI-IMAQ, and
hardware (figure), 1-4
unpacking, 2-4
IMAQ Vision Builder software
integration with DAQ, 1-7
overview, 1-6 to 1-7
pattern-matching capabilities, 1-7
installation
cabling, B-1 to B-2
68-pin VHDCI cable
specifications, B-1
Camera Link cables, B-1 to B-2
procedure, 2-6 to 2-7
safety information, 2-4 to 2-6
unpacking IMAQ PCI-1428, 2-4
I/O connector.
See
connectors.
L
LUTs (lookup tables), 3-3
M
mapping circuitry, 3-4
MDR 26-pin connector, 4-2
Measurement and Automation Explorer
(MAX), 1-3
Medium configuration, Camera Link, 3-3
multiple-tap data formatter, 3-4
N
National Instruments IMAQ Vision
software, 1-6
NI Developer Zone, C-1
NI-IMAQ driver software, 1-5
