Preparing the Environment
Ensure that the environment in which you are using the IC-3173 meets the following
specifications.
Operating temperature
(IEC 60068-2-1, IEC 60068-2-2)
0 °C to 55 °C, 0 °C to 50 °C when Power over
Ethernet (PoE) exceeds 30 W
Operating humidity (IEC 60068-2-56)
10% RH to 90% RH, noncondensing
Pollution Degree
2
Maximum altitude
2,000 m
Indoor use only.
Note
Refer to the device specifications on
for complete
specifications.
Configuring the Hardware
Caution
To ensure the specified EMC performance, product installation requires
either special considerations or user-installed, add-on devices. See the product
installation instructions for further information.
Remove the IC-3173 from the package and inspect the system for damage. Notify National
Instruments if the system appears damaged in any way. Do not use a damaged system.
Ensure that the AC input into the external power supply is disconnected before plugging in or
unplugging any connector. Ground the unit to minimize the possibility of static electricity
damage.
Refer to the following figure while configuring the hardware.
IC-3173 Getting Started Guide
|
© National Instruments
|
3
