©
National Instruments Corporation
7
HDD-8263/8264 Installation Guide
Beim Einbau in einen Gestellrahmen sind folgende Sicherheitsrichtlinien
zu befolgen:
•
Betriebstemperatur
—In einem geschlossenen Gestell oder einem
Gestell für mehrere Geräte kann die Betriebstemperatur höher als die
Umgebungstemperatur sein. Bauen Sie das Gerät daher nur dort ein,
wo die maximale Umgebungstemperatur (t
ma
) 40 °C nicht übersteigt.
•
Belüftung
—Sorgen Sie beim Einbau in ein Gestell oder Gehäuse für
genügend Belüftung, um den sicheren Betrieb des Geräts zu
gewährleisten.
•
Lastverteilung
—Sorgen Sie beim Einbau in ein Gehäuse oder Gestell
für gleichmäßige Lastverteilung.
•
Überlast
—Achten Sie beim Anschließen des Geräts an die Stromver-
sorgung darauf, dass die maximal zulässigen Werte für Strom und
Spannung nicht überschritten werden. Die technischen Daten finden
Sie auf dem Etikett des Geräts. Bei Überlastung können die Über-
stromschaltung und die Kabel beschädigt werden.
•
Erdung
—Achten Sie darauf, dass alle in Gestelle eingebauten Geräte
ordnungsgemäß geerdet sind. Das gilt insbesondere, wenn die Geräte
nicht direkt an die Stromversorgung angeschlossen sind, sondern
beispielsweise über Mehrfachsteckdosen).
•
Redundante Stromversorgung
—Wenn es für das Gerät mehrere
Netzteile gibt, schließen Sie jedes Netzteil zur Steigerung der Ausfall-
sicherheit an einen separaten Stromkreis an.
•
Instandhaltung
—Alle Geräte sind vor der Instandhaltung von der
Stromversorgung zu trennen.
Introduction
The HDD-8263 and HDD-8264 series are applications of cabled
PCI Express technology. These products leverage commercially available
enterprise class RAID controllers and hard drives. For the remainder of
this guide, the term
HDD-826x
refers to any product in the HDD-8263
or HDD-8264 series.