Chapter 1
User Interface
©
National Instruments Corporation
1-31
When you right-click on an item in the
DRC
tab, a pop-up menu displays
with the following available selections:
•
Copy
—Copies all items in the
DRC
tab and places them on the
clipboard.
•
Go to Error/Tag
—Click to go to the highlighted error or warning on
the workspace.
•
Add to Filter
—Click to filter out the selected error/warning type. This
type of error/warning will no longer show in the
DRC
tab.
•
Remove all filters
—Click to remove all error/warning types from the
filter. All errors and warnings will now show in the
DRC
tab.
•
Start Filter Manager
—Click to start the
Filter Manager
. Refer to the
Filter Manager
Use the
Filter Manager
to filter desired errors & warnings out of the
DRC
tab in the
Spreadsheet View
.
Complete the following steps to use the
Filter Manager
:
1.
Right-click in the
DRC
tab of the
Spreadsheet View
and select
Start
filter manager
from the pop-up that appears.
The
Filter Manager
dialog box appears with a list of errors and
warnings that are filtered out of the
DRC
tab. If this is the first time
you are accessing this dialog box, it will be empty.
2.
Click
Add Filter
to display the
Add Filter(s)
dialog box.
